{"product_id":"dow-sylgard-527-silicone-dielectric-gel-clear-0-9-kg-kit-527-sil-dielect-gel-9kg","title":"Dow SYLGARD 527 Silicone Dielectric Gel Clear 0.9 kg \/ 7.2 kg \/ 36.3 kg Kit","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection for delicate electronics.\u003c\/strong\u003e Dow SYLGARD 527 Silicone Dielectric Gel is a two-part silicone gel used for encapsulating, potting, and sealing electronic devices. It provides flexibility, good flow, and low viscosity at a 1:1 mix ratio, allowing it to flow readily under and around components to protect delicate PCB system assemblies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGel characteristics.\u003c\/strong\u003e Gels are a special class of encapsulant that cure to an extremely soft material. SYLGARD 527 is a low-viscosity, very soft gel suitable for delicate components; it retains much of the stress relief and self-healing character of a liquid while providing the dimensional stability of an elastomer. This makes it well suited to isolating circuits from moisture and other contaminants and providing electrical insulation for high voltages.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcessing flexibility.\u003c\/strong\u003e As a two-part gel, it offers processing flexibility with the option of room-temperature cure without ovens, or heat-accelerated cure when faster processing is needed. Its self-healing quality means the cured gel can reflow around probes or leads and reseal, which is valuable in serviceable or test-point assemblies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical performance.\u003c\/strong\u003e Dow's technical data lists dielectric properties supporting its insulating role, including a dielectric constant of about 2.85 at 100 kHz and high volume resistivity on the order of 10^15 ohm-cm. These properties underline its use as a dielectric gel for sensitive, high-voltage, and delicate electronic assemblies. Consult the datasheet for the full property set.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eRecommended For\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eEncapsulating, potting, and sealing electronic devices\u003c\/li\u003e\n\u003cli\u003eProtecting delicate PCB system assemblies\u003c\/li\u003e\n\u003cli\u003eIsolating circuits from moisture and contaminants\u003c\/li\u003e\n\u003cli\u003eElectrical insulation for high voltages\u003c\/li\u003e\n\u003cli\u003eServiceable assemblies benefiting from a self-healing gel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAvailable Variants\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e527 SIL DIELECT GEL .9KG — 0.9 kg kit\u003c\/li\u003e\n\u003cli\u003e527 SIL DIELECT GEL 7.2KG — 7.2 kg kit\u003c\/li\u003e\n\u003cli\u003e527 SIL DIELECT GEL 36.3KG — 36.3 kg kit\u003c\/li\u003e\n\u003cli\u003eAll three variants are the same clear SYLGARD 527 two-part dielectric gel and differ only in kit size, from the 0.9 kg kit for small-scale or prototype work up to the 36.3 kg kit for higher-volume production potting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProduct Details\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e Two-part silicone dielectric gel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix ratio:\u003c\/strong\u003e 1:1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity:\u003c\/strong\u003e Low viscosity; very soft when cured\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure:\u003c\/strong\u003e Room temperature or heat-accelerated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDielectric constant:\u003c\/strong\u003e ~2.85 at 100 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVolume resistivity:\u003c\/strong\u003e ~2.75 x 10^15 ohm-cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer sizes:\u003c\/strong\u003e 0.9 kg, 7.2 kg, and 36.3 kg kits\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePrimary Industries\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eElectronics and PCB manufacturing\u003c\/li\u003e\n\u003cli\u003eAutomotive electronics\u003c\/li\u003e\n\u003cli\u003eTelecommunications\u003c\/li\u003e\n\u003cli\u003eHigh-voltage and power electronics\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandards and Certifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNone specified by source\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dow","offers":[{"title":"0.9 kg","offer_id":47265865072789,"sku":"527 SIL DIELECT GEL .9KG","price":116.0,"currency_code":"USD","in_stock":true},{"title":"7.2 kg","offer_id":47676026486933,"sku":"527 SIL DIELECT GEL 7.2KG","price":818.64,"currency_code":"USD","in_stock":true},{"title":"36.3 kg","offer_id":47676026519701,"sku":"527 SIL DIELECT GEL 36.3KG","price":3209.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/2327\/6437\/files\/Visual1072_105f42df-78fe-4f4f-9682-711babc7cdd0.png?v=1785882774","url":"https:\/\/checkout.labproinc.com\/products\/dow-sylgard-527-silicone-dielectric-gel-clear-0-9-kg-kit-527-sil-dielect-gel-9kg","provider":"Lab Pro Inc Plus","version":"1.0","type":"link"}